The TopHat Adapter is the perfect solution to be able to use screw-in points with your wooden shafts. The Adapter works the same way as an insert does, you can screw a point in it. This makes it really easy to change the weight at the front of the shaft. Of course you can use the Adapter with bullet, combo or field points.
The Adapter needs te be screwd on the shaft, you don’t need to prepare the shaft for this. TopHat claims you don’t even need glue to install the Adapter to your shaft! The Adapter is slightly conical so it always centers perfectly!
Features
Material: AluminumDiameter: 5/16 and 11/32Weight: 40 grains
Tophat® Paralleladapter Aluminum is the perfect solution to equip your wooden shafts with push in nocks. Great if you brake a nock or just want to replace one.
The adapter is screwed on the shaft, no treatment of the shaft necessary. The TopHat® Paralleladapter is suitable with .244 – .246 nocks.
Features
Material: Aluminum
Sizes: 5/16 and 11/32
Weight: 15.2 grain
Even the best archer sometimes misses the target. The TopHat Arrow Stopper makes sure your arrow doesn’t bury itself in the ground, wether you are shooting on grass, in a forest of even in snow.
Ø 5-6,6mm Suitable for carbonshafts with an .166 ID to .204 ID (Like the Bearpaw Penthalon Slim Line and the Easton Axis Traditional)Ø 6,6-8mm Suitable for 5/16 wooden shafts and carbonshafts with an .244 ID (Like the Bearpaw Penthalon and Carbon Express Heritage)Ø 8-9,4mm Suitable for 11/32 wooden shafts and carbonshafts with an outer diameter up to 9,33 mm
Features
Material: High quality plasticSize/color: 5 – 6,5 mm (Pink, Yellow or dark blue), 6,6 – 8 mm (fluor orange, fluor green or black), 8 – 9,4 mm (fluor yellow or red)
The Gateway Feather Arrow Tracer give your aroows some extra visibility. They are very lightweight and add almost no extra weight. Comes in a set of 12 pieces.
Features
Colors: Charteuse, Orange, Pink, Red, White, Yellow.
With these Pin Inserts from Skylon you can provide your set of Skylon arrows with a pin nock. Pin inserts give arrows just a little more strength at the back and protect the arrows when shooting a 'Robin Hood'.These Skylon ID3.2 Pin Inserts fit Skylon (or other brands) shanks with an ID of 3.2mm. Supplied in a set of 12 pieces.
Met deze Pin Inserts van Skylon voorzie je jouw setje Skylon pijlen van een pin nock. Pin inserts geven pijlen net even iets meer stevigheid aan de achterkant en beschermen de pijlen w bij het schieten van een 'Robin Hood'. Deze speciale DLX versie is voorzien van een extra geribbeld randje. Dit zorgt ervoor dat je met minimaal gebruik van lijm toch een goed hechtoppervlak hebt en de inserts beter blijven zitten.Deze Skylon ID3.2 Pin Inserts DLX passen op de Skylon (of andere merken) schachten met een binnendiameter (ID) van 3.2mm.Geleverd per setje van 12 stuks.
